We Leave Our Customers Smiling
Ready for 5-Star Level Service?
About 45% of Framingham households rent, and that changes what a dead burner means. In a two- or three-family in South Framingham, Downtown, or Saxonville, one lockout puts several households on the phone with you before you even know what failed.
Good oil burner repair in Framingham starts with knowing the system. We keep your service history on file, so the technician who shows up can see what was cleaned, what was replaced, and what got flagged last time. You stop re-explaining your boiler to a new face every fall.
The housing adds to it. 77% of Framingham’s homes were built before 1980, and the biggest share went up in the 1950s. Plenty of those capes, ranches, and split-levels run on a burner the current owner inherited, with no clear record of its last cleaning.
Oil burner service in Framingham that ends with a combustion test shows you how the system is actually burning, not just that it’s running. If a repair makes sense, you hear that first. If replacement belongs in the conversation, you get the options laid out and decide on your own time.
Dempsey Energy is a family-owned company that started as an oil company and grew into heating, air conditioning, plumbing, and electrical work. Oil burners aren’t a side line here. They’re where it began. Our office is in North Attleboro, and we provide oil burner service in Framingham for homes and rental buildings in Middlesex County.
The people who visit are called Home Comfort Advisors. Their job is to explain what your burner needs and what your options are, whether that’s a 1950s ranch near Nobscot, an older house around Framingham Centre, or a multi-family in South Framingham.
Massachusetts requires a licensed technician for oil burner work, and our technicians are NATE-certified. With over 12,000 customers, we’ve built our process around tracking service history and staying in touch between visits, so oil furnace repair in Framingham doesn’t start from zero each time.
It starts with a diagnostic check. We look at how the burner starts, what the flame is doing, and what your service history says, then tell you what we find before anything major happens. If you called because the burner locked out, oil burner troubleshooting in Framingham usually comes down to a clogged nozzle, a dirty filter, a worn electrode, or a safety control that needs attention.
Step two is the repair or the maintenance, depending on why you booked. Oil burner maintenance in Framingham means cleaning the combustion chamber, replacing the filter and nozzle, and cleaning the burner and electrodes. Our trucks are stocked with common parts, so many repairs get finished on the first visit instead of costing you a second cold day.
Step three is the system test. The burner gets run, the safety controls get checked, and a combustion test shows how it’s burning. We don’t pack up until it’s confirmed working.
Timing matters here. During the February 22-24, 2026 blizzard, Framingham declared a snow emergency and warned of wind-driven power outages. Booking in late spring through early fall gets you ahead of that kind of week. And if a visit turns into a replacement, the Fire Department takes oil burner installation permits online through OpenGov. A routine cleaning or repair isn’t a permit job.
Ready to get started?
A full oil burner cleaning in Framingham covers the combustion chamber, filter and nozzle, burner and electrodes, oil lines, cad cell, and chimney draft. We test the safety controls and ignition, and close it out with a combustion efficiency test. We service boilers and furnaces from brands including Burnham, Weil-McLain, Peerless, Slant/Fin, and Viessmann.
Older systems are where age and parts availability come into play, so oil heating system repair in Framingham homes from the 1950s and 60s often includes an honest read on where your equipment stands. Our technician will tell you what’s fine, what’s wearing, and what to watch, whether you’re in Nobscot, Framingham Centre, or a rental near downtown.
The Dempsey Comfort Club is how you keep this from becoming a yearly scramble. It gives you priority scheduling for routine maintenance and emergency calls, reminders when your tune-up is due, and your service history tracked from visit to visit. For a landlord with several units on one burner, that record helps when a tenant calls or the building changes hands. Ask us for the current details.
Mass Save runs a Community First program that covers Framingham, and qualifying homeowners may be eligible for incentives on new equipment. Those don’t apply to burner repairs, but it’s good to know if replacement is on your radar. And if you’re comparing oil burner services near you, ask each company what actually happens on the visit.
Once a year, ideally before the heating season starts. In Framingham, where 77% of the housing was built before 1980, plenty of burners are running on systems that have been in the house a long time. Soot and a clogging nozzle build up slowly enough that nobody notices until the burner quits.
Booking oil burner cleaning in Framingham in late spring through early fall also gets you a better choice of appointment times than the week of the first cold snap. If you have a multi-family on one burner, or a system that runs hard, mention that when you call. A cleaning is also when a failing part gets caught on a scheduled visit instead of during a no-heat call.
Start with the simple stuff. Make sure the thermostat is calling for heat, the burner’s emergency switch is on (often on the wall near the burner or at the top of the basement stairs), and there’s oil in the tank. Then press the red reset button once and wait.
If it starts, you’re likely fine for now, though a lockout after an outage is worth a call for a check. If it fails again, stop pressing reset. Repeated resets can flood the chamber with oil. That’s where oil burner troubleshooting in Framingham needs a technician, especially after a storm like the February 2026 blizzard that prompted the city to warn of power outages. If you smell oil or see smoke, turn the switch off and call right away.
Repair first, in most cases. A burner failing because of a nozzle, a cad cell, or a safety control is a repair, and our technicians will tell you that. Replacement comes up when the system is old, the same problem keeps returning, parts are hard to get, or a furnace has a cracked heat exchanger.
Several heat pump installers market to Framingham homeowners, so you may be weighing options already. If oil furnace repair in Framingham gets you through a few more winters, that’s a legitimate answer. If it’s time to plan, you’ll get the choices laid out, including Mass Save incentives you may be eligible for on new equipment. Those incentives don’t cover burner repairs, so nobody should promise otherwise. On any big quote, get a second opinion, including from us.
For a routine cleaning or repair, no. Permits come into play when an oil burner or an above-ground oil tank is installed or altered. In Framingham, the Fire Department takes those applications online through OpenGov, which the city moved to on July 1, 2025. Tank removals have their own separate permits.
The state side comes from Massachusetts General Law Chapter 148, Section 10 and the oil burning equipment rules in 527 CMR, which call for a permit and inspection on installations. If you’re replacing a burner, ask whoever is quoting the job who files the permit and who’s there for the inspection, and get that answer before you sign. Oil burner work in Massachusetts also has to be done by a licensed technician.
Ask whether oil is core work or an afterthought, since many companies in Framingham search results are general HVAC and plumbing outfits. Ask how we handle an emergency call, whether you’ll get priority, what records we keep of each visit, and how reminders work so annual service doesn’t slip.
Here’s our answer. Dempsey Energy started as an oil company, the Dempsey Comfort Club gives you priority scheduling for routine maintenance and emergency calls, and your service history stays on file. Nobody can promise an arrival time in a cold snap, but we can tell you exactly how booking works. For oil heating system repair in Framingham multi-families, that record is what lets you tell tenants something real instead of guessing.
We don’t publish flat prices for repairs, because the number depends on what’s actually wrong. The biggest factors are the age of the system, whether parts are easy to get, how long the diagnosis takes, and whether it’s an after-hours call. In an older Framingham house, ask the technician where parts availability stands before you decide anything.
Our site promises upfront pricing. That means the technician explains the cost and your options before the work happens, not after. If the repair is large, a second opinion is a fair thing to ask for. When you’re comparing oil burner services near you, ask each company whether the price gets explained before the work starts.
Local Resources
Useful Links
Other Services we provide in Framingham
