Mass Save Heat Pump Rebate Massachusetts
Get Paid To Retire Your Oil Heat
Plumbing
Plumbing
Plumbing
Mass Save Heat Pump Program
Your Utility Bill Already Funds This Rebate
The Mass Save heat pump program in Massachusetts is run by the state’s utilities and funded by a charge on your utility bill. Homeowners across Bristol, Norfolk and Plymouth counties have already been paying into it.
In 2026, the Mass Save air source heat pump rebate pays $2,650 per ton for a whole-home system, up to $8,500. Keep your oil boiler as backup and the partial-home rate is $1,125 per ton, with the same cap.
Mass Save also adds $500 for sizing the system correctly and $500 for weatherization. Those bonuses are easy to miss, and they’re real money.
What Backs Our Rebate Help
Mass Save Partner
We help you find every Mass Save rebate you qualify for and handle the paperwork for you.
We Know Oil Heat
We started as an oil company, so we understand the boiler you're retiring and whether to keep a backup.
Heating, Plumbing and Electrical
A heat pump often needs electrical work. We handle heating, plumbing and electrical under one roof.
Family Owned and Local
We're a family-owned company based in North Attleboro, MA, serving homeowners across Bristol, Norfolk and Plymouth counties.
Mass Save Heat Pump Eligibility
Check Eligibility Before You Spend Anything
Start with your utility. Mass Save heat pump eligibility in Massachusetts begins there: you need to be a customer of a sponsor utility, in a one-to-four unit home. Some towns in Bristol, Norfolk and Plymouth counties are served by municipal providers, which can change the answer, so we confirm yours first.
Then comes the equipment and the house. Systems must be ENERGY STAR cold climate certified and on Mass Save’s qualified list, which since January 1, 2026 means R-32 or R-454B refrigerant only. A whole-home rebate also requires a sufficiently weatherized home, and the work has to be finished between January 1 and December 31, 2026.
Mass Save Heat Pump Savings
What Changes When Oil Heat Goes
You stop scheduling oil deliveries and watching the tank gauge all winter.
One system heats in winter and cools in summer, so you skip buying a separate air conditioner.
The rebate check arrives after approval, and the 0% HEAT Loan can carry the cost while you wait.
You know up front whether you're getting the whole-home, partial-home or basic rebate, before you sign anything.
Sizing based on a load calculation means a system that runs steadily instead of struggling on cold nights.
If your electrical panel or water heater needs work too, the same company handles it.
Mass Save Heat Pump Contractor
Ask Any Installer These Questions First
Mass Save itself suggests getting two or three proposals, and we’re fine with that. Here’s what ours includes so you can compare: a home visit, a load calculation that sizes the system to your house instead of a square-footage guess, and a written quote that names the rebate type. Oversizing doesn’t help you, and the $500 sizing bonus rewards getting it right.
Oil customers usually ask one thing first: What happens on the coldest nights? We spell out the backup heat in your plan and what it means when “emergency heat” comes on, so you aren’t guessing in January. A Mass Save heat pump contractor in Massachusetts should be able to tell you that before you sign.
Mass Save Heat Pump Incentives
From Oil Boiler To Rebate Check
Home Visit And Assessment
We look at your oil system and ductwork, and flag any weatherization before it holds up your rebate.
Sizing And Written Quote
A load calculation sets the size. Your written quote names the rebate type and any backup heat.
Install And Paperwork
We install the system, complete the verification form and rebate paperwork, and track it through Mass Save approval.
We Leave Our Customers Smiling
Ready for 5-Star Level Service?
Frequently Asked Questions
How much is the Mass Save heat pump rebate in Massachusetts for 2026?
Mass Save heat pump incentives for 2026 come in three tiers. A whole-home air source heat pump pays $2,650 per ton, capped at $8,500. If you keep your oil boiler as backup, the partial-home rate is $1,125 per ton, also capped at $8,500. A new basic tier pays $250 per ton, up to $2,500, when the heat pump isn’t replacing oil, propane, gas or electric heat. You can add $500 for right-sizing and $500 for weatherization. Income-qualified households may get up to $16,000, and Mass Save sets those thresholds, so check masssave.com. These numbers dropped from 2025, when whole-home paid $3,000 per ton up to $10,000. The federal tax credits also expired December 31, 2025, though some pages online still show them.
Does my oil-heated home in Bristol, Norfolk or Plymouth County qualify for Mass Save?
Usually, yes. Mass Save heat pump eligibility comes down to a few things. Your electric or gas utility has to be a Mass Save sponsor, your home has to have one to four units, and an installer in Mass Save’s Heat Pump Installer Network has to do the work. The whole-home rebate was built for oil, propane and electric-resistance homes, which covers a lot of houses in Attleboro, MA, Franklin, MA, Foxboro, MA, Canton, MA, Norwood, MA, Dedham, MA and Wellesley, MA. The catch is the utility. Some towns in Bristol, Norfolk and Plymouth counties are served by municipal electric or gas providers, which can change what you qualify for. Give us your address and we’ll check before you spend anything.
Do I have to remove my oil boiler to get the whole-home rebate?
Only for the whole-home rebate. The Mass Save air source heat pump rebate at the whole-home level requires you to remove or permanently disconnect your existing oil, propane, gas or electric-resistance system, and you’ll sign a Whole-Home Heat Pump Verification Form saying so. If you’d rather keep the boiler as backup for the coldest days, the partial-home rebate applies instead, at $1,125 per ton rather than $2,650. Neither choice is wrong. It depends on your house, your ductwork or ductless layout, and how comfortable you are without a second heat source. We’ll walk through both options with the numbers side by side for your home. Mass Save allows one whole-home rebate per account.
Will a heat pump keep my house warm on the coldest Massachusetts days?
Cold-climate certified heat pumps are built for Massachusetts winters, and Mass Save only rebates equipment with that certification. Most trouble comes from sizing and setup, not the technology. If a system is too small or poorly set up, the backup “emergency heat” runs when it shouldn’t and your electric bill climbs. Mass Save heat pump savings disappear fast that way, which is why we size with a load calculation and put the backup plan in your quote. If you ever see emergency heat running on a mild day, call us, because something is off. No heat pump removes every cold-night question, but you should get a straight answer before you buy.
How does Mass Save heat pump financing work, and do I pay upfront?
The Mass Save HEAT Loan is the main Mass Save heat pump financing option in Massachusetts. It’s 0% APR, up to $25,000, with terms up to seven years. Terms can vary by income and lender, and the lender approves your credit. You need to own a one-to-four unit home and complete a Mass Save Home Energy Assessment first. Whole-home and partial-home rebates are mailed after the work is approved, and checks typically arrive eight to ten weeks later. The loan can carry the cost in the meantime, so you aren’t paying the full bill out of pocket and waiting. Ask us what’s possible for your project and we’ll tell you what’s confirmed rather than guess.
How long do I have to get a heat pump installed to qualify in 2026?
Mass Save’s 2026 rebates apply to systems installed between January 1 and December 31, 2026. Equipment lead times can stretch in heating season, and the weatherization step takes time, so waiting for the first cold snap is the riskiest plan. Rebate levels have already dropped once and aren’t guaranteed to hold, so check masssave.com for current numbers. Starting early with a Mass Save heat pump contractor in Massachusetts also gives you room to compare two or three proposals. Call us at 774-719-0298 and we’ll set up a home visit. If you already heat with oil through us, tell us when you call and we’ll start from what we know about your system.
- Dedham
- Franklin
- Middleboro
- Norwood
- Norfolk
- Wellesley
Serving Southeastern Massachusetts & Beyond
Dempsey Energy is proud to offer top-notch heating, cooling, plumbing, and energy solutions to homes across Southeastern Massachusetts, including the Greater Boston Area. Whether you need a quick repair, routine maintenance, or a full system installation or replacement, our experienced team is here to deliver dependable, high-quality service tailored to your needs.
From emergency plumbing fixes to energy-efficient HVAC upgrades, we bring over 30 years of expertise and a commitment to your comfort and satisfaction. Explore our service area on the map to see if we’re in your neighborhood, and let us show you why we’re the trusted choice for homeowners across the region.
Need help now? Give us a call today!