We Leave Our Customers Smiling
Ready for 5-Star Level Service?
The first decision in oil to gas conversion in Marlborough is whether Eversource has a main on your street. Eversource supplies gas across Marlborough, but not every street has a main—the answer can shift from one block to the next. Downtown, the townhouse areas off Route 20, Carisbrook, and the streets near Fort Meadow and Lake Williams may all be different. We check your address with Eversource before you spend a dollar on a plan that can’t be built.
If gas is available, heating system conversion in Marlborough often happens when you’d be replacing your oil system anyway. The median Marlborough home was built around 1969 to 1971, when oil was the default, so many boilers, furnaces, and basement tanks are reaching the end of their service life. When yours is 15 to 20 years old, oil furnace conversion to gas becomes a choice between two replacements, not an extra expense. New high-efficiency gas equipment reaches 95% efficiency or better.
Timing matters in Marlborough’s climate. The cold season runs from early December to mid-March, with January lows averaging around 19°F—a miserable time to discover your tank is low or your boiler has failed. A heating system conversion done ahead of winter keeps you out of that spot. Once gas reaches your house, the installation usually takes one to two days, and the old tank leaves your basement for good.
Dempsey Energy is a family-owned HVAC and plumbing company that started out delivering heating oil. That history matters when you’re thinking about leaving oil behind. We know these systems from the delivery truck side, so we can tell you straight whether your oil heating replacement in Marlborough should happen now or in a few years.
Our customer base is about 12,000 homeowners across the region, and the way we keep that trust is simple: track every service call and follow up to make sure the repair held. Marlborough is part of the Middlesex County area we serve, and the work is the same whether you own a Cape Cod, a ranch, or a two-family closer to downtown.
You’ll get the scope in writing, including the tank, permit, venting, and piping, so you can compare it against any other quote you collect. If oil to gas conversion in Marlborough doesn’t make sense for your house, we’ll say so.
The first step is the street, not the boiler. You give us your address, and we confirm with Eversource whether a main runs past your house. If it does, Eversource handles the service line and sets the meter. If it doesn’t, the conversation shifts to a main extension and whether your neighbors want gas too. That takes longer, and we’ll tell you so up front instead of guessing at a date.
Next, we look at what you have now: the oil furnace or boiler, the tank, the venting, and whether the chimney needs a liner. Older piping in Marlborough homes can carry asbestos, and the town has everything from French Hill’s oldest houses to 1960s ranches, so we coordinate remediation before the old equipment comes out when it’s needed.
Then comes the permit. Marlborough’s Inspectional Services only accepts plumbing and gas permit applications from licensed contractors through its online portal, so we apply and schedule the city’s gas inspection. A typical oil boiler conversion to gas in Marlborough takes one to two days: old equipment out, new gas piping in, the new furnace or boiler, venting, safety testing, and tank removal. After the inspection passes, Eversource sets the meter. Because the service line and permit take weeks, spring or summer is far easier than a January emergency.
Ready to get started?
Here’s what’s in the job. A full oil to gas heating conversion in Marlborough covers the gas availability check, the permit and inspection, removal of your oil furnace or boiler, a new high-efficiency gas unit, piping and venting, a chimney liner when your setup calls for one, safety testing, and removal of the oil tank. Eversource runs the service line and meter. We coordinate with them and line up asbestos remediation where old piping needs it. You deal with one company.
Typical conversions run $5,000 to $15,000. What moves your number: the distance from the main to your house, how much gas piping the house needs, chimney lining, an above-ground or underground tank, and furnace versus boiler. On a two- or three-unit building near downtown Marlborough, more piping and more appliances push the price up, so those get quoted building by building. Mass Save no longer rebates gas equipment, so we’d rather show you the math without it. Financing is available, so ask about current terms for gas heating installation in Marlborough.
Afterward, you can join the Dempsey Comfort Club, our membership program. It includes priority scheduling for routine and emergency calls, member discounts on service, and extended warranty options. Details vary, so ask what applies to your equipment. New equipment carries a manufacturer warranty, typically 10 to 20 years, and select installs carry a labor warranty. Ask what covers your job.
Give us your address and we’ll check with Eversource. That’s the only reliable way, because Eversource supplies gas across Marlborough but not every street has a main, and the answer can change from one block to the next. A quick clue is whether your neighbors have gas meters on the outside of their houses, but it still needs confirming before you plan oil to gas conversion in Marlborough.
If a main is there, Eversource runs the service line from the street to your house and sets the meter after the city’s inspection passes. If it isn’t, you’re looking at a main extension, which usually depends on enough neighbors signing up and can take anywhere from six months to two years. We won’t promise a gas date we can’t control, and we’ll tell you which path you’re on before you spend money on equipment.
Most conversions run $5,000 to $15,000. Where you land depends on the distance from the main to your house, interior gas piping, chimney lining, whether the oil tank is above ground or buried, and whether you’re putting in a furnace or a boiler. Larger multifamily buildings near downtown Marlborough cost more because of the extra piping and appliances.
Contractors typically estimate savings of $800 to $1,000 a year, and some Dempsey Energy customers report $1,000 or more. On a $5,000 job with $1,000 a year in savings, you’d pay it back in about five years. A $15,000 job takes much longer. That’s why how long you’ll stay matters. Marlborough homes sell fast, around 23 days on the market, so if you may move within a few years, oil to gas conversion in Marlborough may not pay for itself. Mass Save rebates for gas equipment ended October 1, 2024, so don’t count on one.
Yes. Gas work in Marlborough is done under a permit, and the city only accepts plumbing and gas permit applications from licensed contractors. As a homeowner, you can’t pull it yourself. Applications go through the online portal run by Marlborough Inspectional Services, at 140 Main Street, 2nd Floor.
For any oil boiler conversion to gas in Marlborough, Dempsey Energy applies for the permit and schedules the inspection with the city’s Plumbing/Gas Inspector once the work is done. Eversource sets your meter after the inspection is approved. Massachusetts also licenses plumbers and gas fitters at the state level, and you can verify any contractor’s license by calling the state board at 617-727-9952.
Both are real options, and we install both, so we’re not steering you. Gas tends to fit when you already have radiators or ductwork you want to keep, gas is available on your street, and you want a lower upfront cost. A heat pump can fit when your house and electric costs line up. Mass Save now puts its incentives toward heat pumps, not gas equipment.
In Marlborough, much of the decision comes down to your street. If there’s no main nearby, an oil furnace conversion to gas may be slow or off the table, and a heat pump becomes the easier comparison. If gas is available, get written quotes for both with the same scope and compare them side by side, including what you’d pay for gas versus electricity. We’d rather you pick the right system than the one we happen to sell more of.
If your system is newer and running well, keeping it can be the smart call. Conversion pays off mostly when the oil equipment is due for replacement anyway, gas is available without a costly extension, and you plan to stay around ten years.
Signs it’s time to look: the furnace or boiler is 15 to 20 years old, the tank is 20 or more, repairs are stacking up, or you’re tired of juggling deliveries. Marlborough’s median home was built around 1969 to 1971, so some houses here are in that window. The best time to plan oil heating replacement in Marlborough is spring or summer, when the utility and permit steps won’t be racing a cold snap. If your system fails in January, the priority is getting heat back, and we’ll tell you whether a repair buys you time to plan a conversion properly.
The tank comes out, and so does the old equipment. Above-ground tank removal typically runs about $500 to $1,500 and a buried tank about $1,000 to $3,000, based on Massachusetts cost guides, and a buried tank may need an environmental assessment first. We handle removal to local and state requirements and put it in the written scope so it isn’t a surprise line later.
In Marlborough homes from the 1960s and 70s or earlier, old boiler piping may also carry asbestos. If yours does, we coordinate remediation before the work starts. Once the tank is gone, you get that basement floor back, which in a smaller Cape Cod or ranch is no small thing. A good oil to gas heating conversion in Marlborough leaves the basement cleaner than it found it. If you’ve been searching for oil to gas conversion near you and want to know what applies to your house, Dempsey Energy can walk through it with you.
Local Resources
Useful Links
Other Services we provide in Marlborough
