Oil to Gas Conversion in Foxborough, MA

Cut Your Heating Bills by 75%

Stop paying four times more for heat than your neighbors with natural gas systems.
A natural gas meter and pipes are installed alongside the exterior wall of a house, next to a concrete pathway and wooden fence, in bright daylight—serviced by a trusted HVAC Contractor North Attleboro for reliable performance.

We Leave Our Customers Smiling

No reviews to display yet.

Ready for 5-Star Level Service?

Close-up of pipes and cables connected to a white outdoor utility box mounted on a brick wall, with tall buildings in the blurred background—ideal setup for AC Installation North Attleboro, MA.

Convert Oil Furnace to Gas Foxborough

What $800+ Annual Savings Looks Like

You’re done scheduling oil deliveries at 6 AM because you forgot to check the tank. No more watching oil prices swing from reasonable to ridiculous and back again, wondering if this winter will break your budget.

With oil to gas conversion in Foxborough, your heating costs become predictable. Your monthly bills drop by hundreds. Your basement gets that space back where the oil tank used to sit.

The math is straightforward: Massachusetts homeowners switching from oil to natural gas save $800 to $1,000 every year on heating costs. Your new gas system runs at over 95% efficiency compared to your oil system’s 70-80%. That efficiency gap translates directly into money staying in your account instead of going up the chimney.

Oil to Natural Gas Conversion Foxborough

30+ Years Converting Foxborough Homes

Dempsey Energy started as a family oil company in 1992. We’ve been in your shoes – we understand oil heating because we used to deliver it. That’s exactly why we expanded into HVAC and now specialize in helping Foxborough homeowners make the switch to gas.

We’ve spent over three decades learning what works in Massachusetts homes. Our NATE-certified technicians know Foxborough’s housing stock, from the older colonials near the center of town to the newer developments. We understand how New England weather affects your heating needs and how to size systems that handle our coldest days without waste.

Being local means we’re here when you need us. We offer 24/7 emergency service to Foxborough residents, and we’re part of this community. We see you at the grocery store, at town events, at kids’ games. Your comfort matters to us because this is our home too.

A tankless water heater is mounted on the exterior gray wall of a building, with several pipes and wiring connected beneath it—professionally installed by an HVAC Contractor North Attleboro.

Switch from Oil to Gas Heat Foxborough

The Complete Conversion Process Explained

First, we assess your current heating system and your home’s gas availability. Most Foxborough neighborhoods have natural gas lines, but we verify what’s available at your specific address. We calculate your home’s heating requirements and recommend the right equipment size – not too big, not too small.

Next comes permitting and coordination. We handle all the paperwork with the town and schedule the required inspections. We coordinate with National Grid for your gas meter installation and arrange for your old oil tank removal. You don’t chase down different contractors or worry about scheduling conflicts.

Installation typically takes one to three days depending on your home’s setup. We remove your old oil equipment, install your new gas furnace or boiler, connect it to your existing ductwork or piping, and test everything thoroughly. We don’t leave until your heat is working perfectly and you understand how to operate your new system.

White industrial pipes with gauges, valves, and electrical components are mounted on an exterior wall next to a closed metal garage door. A red fire protection sign is attached to the top of the main vertical pipe by an HVAC Contractor North Attleboro.

Ready to get started?

Explore More Services

About Dempsey Energy

Get a Free Consultation

Oil Furnace to Gas Conversion Foxborough

What's Included in Your Conversion

Your oil to gas conversion includes complete removal of your old heating equipment and professional installation of your new gas system. We handle all permits, coordinate inspections, and arrange for your oil tank removal with licensed disposal companies. The new equipment comes with manufacturer warranties, and we provide ongoing service support.

In Foxborough specifically, we work with homes built anywhere from the 1800s to brand new construction. Older homes often need additional considerations like chimney modifications or electrical updates, which we coordinate with licensed specialists. Newer homes typically have straightforward conversions since they were built with modern standards.

We also help you access available rebates through Mass Save programs. Massachusetts offers substantial incentives for oil to gas conversions, including rebates up to $1,500 and 0% financing options. We handle the paperwork to make sure you get every dollar you’re entitled to. These incentives can significantly reduce your upfront conversion costs, making the switch even more attractive financially.

A woman in work overalls adjusts controls on an orange industrial machine while a man in the foreground, possibly an HVAC Contractor North Attleboro, writes on a clipboard.

How much does oil to gas conversion cost in Foxborough, MA?

Oil to gas conversion costs in Foxborough typically range from $5,000 to $15,000, depending on your home’s specific requirements and the type of equipment you choose. The price includes removing your old oil system, installing new gas equipment, permits, inspections, and connecting to the gas line. Several factors affect your total cost: whether you need a new gas line run to your home, the size and efficiency of your new heating system, and any necessary modifications to your chimney or electrical systems. High-efficiency systems cost more upfront but save more money long-term through lower operating costs. The good news is that Mass Save rebates can reduce your out-of-pocket costs by up to $1,500, and 0% financing is available for qualified homeowners. Most Foxborough residents find that their annual heating savings of $800-$1,000 pay for the conversion within 5-7 years, and then they’re saving money every year after that.
The actual installation work for oil to gas conversion typically takes 1-3 days, but the complete process from start to finish usually takes 2-4 weeks due to permitting, inspections, and utility coordination. We handle all the scheduling and paperwork to minimize delays. Here’s the typical timeline: Initial consultation and assessment happen within a few days of your call. Permitting with the town takes 1-2 weeks. If you need a new gas line to your home, National Grid scheduling adds another 1-2 weeks. The actual equipment installation and testing takes 1-3 days of work. We coordinate everything so you’re never without heat during the conversion. If we’re working during heating season, we often install your new system first and test it before removing your old oil system. This ensures you always have a working heating system, even if something unexpected comes up during the installation.
Yes, Massachusetts homeowners typically save $800-$1,000 per year after converting from oil to natural gas. The savings come from natural gas being significantly cheaper per unit of heat produced and from modern gas equipment running much more efficiently than older oil systems. Here’s why the savings are real: Natural gas costs about $1 less per unit of heat than oil, and that difference adds up quickly over a heating season. Your new gas equipment will run at 90-95% efficiency compared to your oil system’s 70-80% efficiency. You’ll also eliminate oil delivery fees and reduce maintenance costs since gas burns much cleaner. The exact savings depend on your home’s size, insulation, and heating habits, but most Foxborough homeowners see their heating bills drop by 30-50% after conversion. Even accounting for the upfront conversion cost, most homeowners break even within 5-7 years and then save money every year after that for the life of the equipment.
Yes, oil to gas conversion in Foxborough requires permits from the town and inspections by the local code enforcement officer. You’ll need a gas permit for the new equipment installation and potentially a plumbing permit depending on your specific setup. Don’t worry – we handle all the permitting for you. The permit process ensures your conversion meets all local and state safety codes. The town inspector will check that your new gas equipment is properly installed, vented, and connected. If you’re getting a new gas line to your home, National Grid also requires their own inspection before they’ll install your gas meter. We’ve worked with Foxborough’s building department for years and know exactly what they require. We pull all necessary permits, schedule inspections, and make sure everything passes the first time. This protects you from safety issues and ensures your homeowner’s insurance remains valid. The permit costs are included in our conversion pricing, so there are no surprises.
Your old oil tank must be properly removed and disposed of by licensed professionals as part of your oil to gas conversion. We coordinate with certified tank removal companies to handle this safely and in compliance with Massachusetts environmental regulations. The tank removal cost is typically included in your conversion estimate. Underground tanks require excavation and soil testing to ensure no environmental contamination occurred. Above-ground tanks are simpler to remove but still require proper disposal since they may contain residual oil and sludge. All oil remaining in your tank will be pumped out and recycled according to state requirements. We handle all the coordination and scheduling so you don’t have to manage multiple contractors. The tank removal company will obtain any necessary permits from the town and provide you with proper disposal certificates for your records. This documentation is important for future home sales and protects you from potential environmental liability.
Most of Foxborough has natural gas service available, but availability can vary by specific street and neighborhood. We can quickly check gas availability at your exact address by contacting National Grid and reviewing their service maps for your area. If gas service is available on your street, connecting to it is straightforward. National Grid will run a service line from their main to your home and install a gas meter. If gas isn’t currently available on your street, you may still have options depending on how close the nearest gas main is and whether enough neighbors are interested in service to make extension economically viable. Even if you don’t currently have gas service, it’s worth checking because National Grid regularly expands their network throughout Foxborough. New gas lines are often installed during road work or when multiple homeowners in an area request service. We can help you understand your options and potentially coordinate with neighbors who might also be interested in converting from oil to gas.